Heating Oil (TU 5/20)

Modern and traditional: two in one. Perfect solution for industrial and communal oil fired equipment of a smaller capacity.

Modern additives

At its wholesale depots MOL is marketing this heating oil formulated with modern additives. The heating oil is the fuel for homes and industrial or community oil fired equipment of a smaller capacity.

Advice and recommendation for use

The most commonly observed problems in using heating oils arise from storage conditions that disregard the parameters of the heating oil.

Take care on following

• Storage: In case of storage outdoors or in an unheated room, the pumping and atomising capability of the product is significantly reduced at temperatures below 0 °C.
• Suction and vaporization: The limit for pumping is 5 ˚C and for the vaporisation capability 20 ˚C must be provided.
• Water-free condition: During a prolonged storage, moisture may condense through the ventilation of the tank due to the temperature fluctuation, which may result in an increase of the water content. Water accumulated in the tank deteriorates the firing parameters, and by accumulating at the bottom of the tank, it prevents the discharge of the product. Therefore it is advisable to inspect the tanks periodically and to remove the accumulated water.

Sales Information

• Standard No.: MSZ 11715:1997
• Customs Tariff No.: 2710006702